Merdeka sales !!
All Products
Sort by
Show result

This standing fan is a good partner for the long, hot days. You can put it in workplace, factories, garage, or at home.

It has big air volume: Blade is streamline design with sustained strong air.

Higher safety: Overheating protection and high density grill design to ensure safety and reliability.

Long service life: Low temperature rising and stable performance to ensure long service life.

Low noise: Ball bearing and noiseless gearbox design to avoid noise.

Energy saving: Low energy consumption for electrical motor, big air volume, high efficiency, environmental friendly.


Voltage: 240V/50Hz

Power: 160w


Type: Standing Fan

Air Volume: 13000m3/h

Noise: 68dB(a)

Speed Grade: 3 Grades for Choosing



  • HP: 0.28HP
  • WATT: 200W
  • CURRENT(A): 1.5A
  • H.MAX(m): 25m
  • Q.MAX(1/min): 33
  • PIPE SIZE(inch): 1“ X 1"
  • PRESSURE SET(bar): 1.5bar

JIONGJIE 16.8V Heavy Duty Cordless Drill with 2 Speed

Model T16

Fully Charged at 16.8V Lithium Battery.

Provide a maximum torque of 33Nm during drilling.

Working Time 90 minutes.

Battery Life : Upto 300 recharging cycles.

Speed Variation Pressure Sensitive Switch and Forward/Reverse Switch.

Dual Speed Selection (Hi-1,350 r.p.m.& Lo-400

Front LED for lighting once Power Switch is Press ON.

Provide 15+1 steps of torque setting during screw driving for cater of screwing different kind of materials.

And a Drilling Step which is at its maximum Torque for Go-Tru Drilling.

Come with One high quality 16.8V, 1500mA Battery.

Free with Shili 11pcs Screw bit set with Flexible Hose

Handle enclosed with Soft Rubber Grib for better ergonomic handling.

6 months warranty against any defects.


JIONGJIE 21V 4.0AH HEAVY DUTY 4-Mode Rotary Hammer

The JIONGJIE is a powerful compact cordless rotary hammer, delivering an exceptional performance-to-weight ratio for anchoring in concrete, drilling in masonry, core cutting and chiseling.


.For industrial applications

.4-mode operation (rotary hammer, rotary drill, hammer mode)

.SDS-Plus chuck & 360° grip handle

.Warranty 6 months

**Technical data**

Voltage 21V

Battery 21V 4.0Ah x 2unit

Battery type lithium ion

No-load speed 0-1400rpm

Impact rate 0-4,500bpm

Impact energy 1.7 Joules

Chuck type SDS-Plus

Max. drilling capacity :

.Concrete 22mm

.Steel 13mm

.Wood 28mm

Warranty 6 months


JIONGJIE 2in1 Cordless Impact Wrench & Driver 21V 4.0Ah 350N.m

Model M150R

The extremely robust JIONGJIE cordless impact wrench. Short, lightweight design with powerful 350Nm of torque (1/2in drive., 21 Volt / 4.0Ah).


.Suitable for professional application.

.21V 4-pole dc motor with overload protection.

.21V 4.0Ah Li-ion battery with 1hour charger.

.Powerful with max. 350Nm of torque.

.1/2 in square drive.

.Compact & ergonomic design with soft grip handle.

.Only 185mm long.

.Extremely light, glass-fiber reinforced casing.

.Radial impact function.

**Technical Specifications**

Model M150R

Battery voltage 21V

Type Lithium battery

Battery capacity 4.0Ah

No load speed 0-3,000rpm

Impact rate 0-3,300bpm

Max. torque for hard screwdriving 350Nm

Weight incl. battery 1.5kg

Warranty 6 months


1x JIONGJIE 21V cordless impact wrench

1x 22mm 1/2" dr. socket

2x 21V 4.0Ah max lithium batteries

1x Screw Bit

1x Fast charger (1 hour charging)

1x Tool carry case


Small, lightweight all-rounder for occasional use for light soiling. For example, garden furniture, bicycles and small areas around the house. Ideal for use as a second machine.

Compact, lightweight, practical, robust - the K 2.050 is ideal for occasional use around the house. This high-pressure cleaner is suitable, e.g. for cleaning cars, garden furniture or patios. An impact-resistant, recyclable plastic casing effectively prevents dirt particles from damaging the motor and pump. A safety valve prevents pressure overload. A pressure switch control switches the motor on and off when the trigger gun is pressed and released. High-performance machine with high-quality N-Cor pump to reduce noise. A detergent injector system supplies detergent to the area being cleaned also at low pressure. A large on/off switch for ease of use, practical hook for cable storage and an ergonomically designed trigger gun for effortless cleaning are further features of the K 2.050


- One-jet spray lance
- Dirt Blaster
- Lance extension
- High-pressure hose, 3m
- High-pressure gun, Standard Quick Connect
- Detergent application via, Suction
- Integrated water filter
- A3/4" garden hose connector adaptor

FOC Garden Hose



The Puzzi 8/1 C is a powerful entry-level spray extraction machine. The spray extraction machine can be used for upholstery cleaning or for removing stains on carpets. Because an extremely small amount of residual moisture remains after cleaning, cleaned carpets and upholstery can be quickly used again. Equipped as standard with a spray vacuum hose and ergonomic hand nozzle.

Technical data
Max. area performance (m²/h) 12 - 18
Air flow rate (l/s) 61
Vacuum (mbar/kPa) 230 / 23
Spray rate (l/min) 1
Spray pressure (bar) 1
Fresh/dirty water tank (l) 8 - 7
Turbine power (W) 1200
Pump power (W) 40
Voltage (V) 220 - 240
Frequency (Hz) 50 - 60
Weight (kg) 9.8
Dimensions (L × W × H) (mm) 530 x 330 x 440

Item Value
Voltage 10.8V
Weight 1.0kg
No-load speed 350 / 1,300 rpm
Max Torque 30Nm
Battery capacity 1.5Ah / 2.0Ah

1. 10.8V powerful motor 
2. High-performance 2 speed gear 
3. Lightest among the same grade products 
4. Compact size 
5. 18-stage torque (Power) control 
6. Light function / Battery level indication

Voltage 10.8V
Weight 0.9kg
No-load speed 2,400 rpm
Max Torque 100Nm
Battery capacity 2.0Ah

1. High performance motor
2. Light and ergonomic design
3. Display remainning run-time
4. Lithium-ion battery
5. Built in LED Light


KEYANG DM18BL – 18V Brushless Hammer Drill

• New compact design brushless hammer drill.
• Brushless motor gives you longer run time and better performance.
• Ergonomic soft grip handle provides comfort and balance to the user.
• 13mm heavy duty metal keyless chuck.
• 2 x 2.0Ah batteries.
• Robust carry case.


Parameter Unit DM18BL
Weight with battery kg 1.9
No Load Speed (rpm) Min-1 0-550/0-2,000
Chuck adaptor (mm) mm 13 Keyless
torque-control Nm 60
Charging Time (min.) min 40
Battery Option   2.0Ah
Availability   Kit (inc 2 x Batteries)

Keyang 18V Cordless Brushless Rotary Hammer Kit 5.0Ah K-HD18BL

18V Cordless Brushless Rotary Hammer Kit 5.0Ah
Adjustable Depth Guide
Heavy Duty Clutch

18V Brushless Motor
No Load RPM: 0-1,200/Min 
BPM (Beats Per Minute): 0-4,400/Min
Max Working Capacity: Concrete 20mm
Battery Capabilities: 5.0Ah
Weight: 3kg

Kit Includes:
2 X 5.0Ah Lithium Ion Batteries
1 X Fast Charger
1 X Plastic Carry Case



1. Highly Efficient Brushless Motor (BLDC)
2. 1~3 Level Speed Changeable
3. LED Lighter
4. Slow (1 sec.) & High Speed Impact Drilling
5. Hit Holder


Voltage 18V
Weight 2kg
No-load speed 1900rpm
Max Torque 1000Nm
Battery capacity 5.0Ah